<li id="dge7z"><acronym id="dge7z"><u id="dge7z"></u></acronym></li>
<button id="dge7z"><acronym id="dge7z"></acronym></button>

    1. <strong id="dge7z"><optgroup id="dge7z"><table id="dge7z"></table></optgroup></strong>

        <em id="dge7z"><object id="dge7z"><input id="dge7z"></input></object></em>

      1. 云南惠博橋架設備有限公司歡迎您!
        1. 首頁
        2. 新聞中心
        3. 行業資訊
        4. 內容

        云南梯式橋架和云南槽式橋架的區別

        作者:創始人 日期:2022-04-08 人氣:48

        云南梯式橋架和云南槽式橋架的區別
        云南槽式橋架是橋架行業最常用的型號,全密封,如盒子般形狀,防塵,抗干擾能力非常強,高防護承載著線纜不易受到嚴重腐蝕損傷,常用于各大建筑行業,結構簡單,防護性能強,荷載能力好,所以是橋架行業最熱門的型號,一般用于敷設數據控制電纜、通訊信號電纜等等。
        云南梯式橋架外形獨特,像梯子形狀,不過它的承載能力比槽式、托盤式橋架都要強,因為它中間焊接橫桿加固,線纜敷設在主干線上,獨特的外形使得它重量變輕,散熱透氣性能好,方便與施工人員更好的安裝,而且安全性也非常高,當線路出現損壞導致故障,維護人員也能清楚找出問題線路采用相應的安全措施,讓該產品成為橋架行業的新焦點,常用于敷設直徑較大的電纜,高低壓動力電纜、電力電纜等等。
        橋架廠家總結:槽式橋架和梯式橋架各有各優勢,針對不同環境設計,更好的去敷設每一條線纜,當線纜不多的情況下,也可以將不同等級線纜敷設在同一條橋架上,聯系生產廠家將橋架中間加隔板,用隔板對不同等級的線纜進行區分隔離,降低成本,各自運轉。如果遇到高腐蝕、防火要求高的施工環境,可以對橋架做出相應的措施,通常橋架是用冷軋板制造而成,進行表面處理;熱鍍鋅(熱浸鋅)、防火烤漆、電鍍鋅、靜電噴塑、針對性的防護或者采用更好的原板材制造:不銹鋼、鋁合金、玻璃鋼。

        Yunnan ladder bridge and yunnan trough bridge difference

        Groove bridge is a bridge in yunnan industry the most commonly used models, fully sealed, like the box shape, dustproof, strong anti-jamming capability, high protective carrying cable less susceptible to serious corrosion damage, often used in the construction industry, simple structure, protective performance is strong, good load capacity, so is the most popular model bridge industry, Generally used for laying data control cables, communication signal cables and so on.

        Yunnan ladder type bridge appearance is unique, like a ladder shape, but its bearing capacity is stronger than the groove type, tray type bridge, because it is the middle welding bar reinforcement, laying cable in the trunk, unique appearance makes it lighter in weight, heat dissipation good ventilation performance, convenient and better installation and construction personnel, and security is also very high, when there is damage to the circuit leads to failure, Maintenance personnel can also clearly find out the problem line using the corresponding safety measures, so that the product has become the new focus of the bridge industry, often used for laying large diameter cables, high and low voltage power cables, power cables and so on.

        Bridge manufacturer

        Conclusion: groove bridge and ladder type bridge each have each advantage, according to different environment design, better to each cable laying, when the cable is not much, can also be different grade laying cable rack at the same bridge, contact the manufacturer will bridge with partition, with partition to distinguish between different levels of cable isolation, reduce cost and their operation. If the construction environment with high corrosion and high fire protection requirements is encountered, corresponding measures can be taken for the bridge. Usually, the bridge is made of cold rolled sheet, and the surface treatment is carried out. Hot dip galvanized (hot dip zinc), fire paint, electric galvanized, electrostatic spraying, targeted protection or use better original plate manufacturing: stainless steel, aluminum alloy, glass fiber reinforced plastic.



        你覺得這篇文章怎么樣?

        00

        相關內容
        _久久精品免费综合体验区_久久精品a国产一级_a4yy欧美理论一级